Zetor FORTERRA HSX 140 - Front Tires Steerability; Change of the Load-Bearing Capacity of the Front Tyres (%)

Front tires steerabilit
y
Tyre dimensions Travelling speed
40 km.h
-1
30 km.h
-1
Tyreload-bearing capacity
(kg)
Tyreload-bearing capacity
(kg)
Tyre
1 pc
Axle Inflation (kPa) Tyre
1 pc
Axle Inflation (kPa)
12.4-24 1140 2280 220 1425 2850 220
12.4R24 1360 2720 160 1455 2910 160
12.4-28 10PR 1432 2864 280 1790 3580 280
13.6R24 1450 2900 160 1550 3100 160
14.9-24 1408 2816 180 1760 3520 180
14.9R24 1700 3400 160 1820 3640 160
380/70R24 1650 3300 160 1765 3530 160
420/70R24 1900 3800 160 1950 3900 160
The load-bearing capacity values refer to the front wheel track of 1730 - 1740 mm.
Note: The 380/70R24 tyre is a dimensional equivalent of the 13.6R24 tyre.
The 420/70R24 tyre is a dimensional equivalent of the 14.9R24 tyre.
The specified inflation values are minimum valued adapted to the current tyre load so that the tyre
deformation can remain in the range in which all the operation requirements are met.
During operation on a hard base it is suitable with regard to slippage and abrasion of the tyre to increase the
pressure by 30 kPa.
Change of the load-bearing capacity of the front tyres (%)
Tyre dimensions Travelling speed
20 km.h
-1
8 km.h
-1
Tyreload-bearing capacity
(kg)
Tyreload-bearing capacity
(kg)
Tyre
1 pc
Axle Inflation (kPa) Tyre
1 pc
Axle Inflation (kPa)
12.4-24 1710 3420 220 1995 3990 220
12.4R24 1670 3340 160 2040 4080 160
12.4-28 10PR 1950 3900 250 2505 5010 280
13.6R24 1780 3560 160 2175 4350 160
14.9-24 1950 3900 160 2464 4930 180
14.9R24 1950 3900 150 2550 5100 160
380/70R24 1950 3900 150 2475 4950 160
420/70R24 1950 3900 130 2550 5100 140
Travelling speed (km/h) diagonal radial
8 + 40 + 50
20 + 20 + 23
30 0 + 7
0 - 20 0
MAIN TECHNICAL PARAMETERS
214