32
GETTING ACQUAINTED WITH THE TRACTOR
NM13N041 C127 NM13N040
MANUAL FUEL CONTROL LEVER
a - idle run
b - maximum supply
The lever enables to set engine revolu-
tions in the whole range (a) to (b).
ENGINE RUN STOP CONTROL
By pulling the control out, there is an
immediate engine operation stop and by
turning it slightly in a pulled out position,
the position is locked.
After stopping the engine run, return the
control back.
If a control remains pulled out,
engine may not be started.
HYDRAULIC CONTROL
Hydraulic control panel with levers (A) is
placed in the area of right fender.
Hydraulic controls (B) are placed in front
of driver’s seat.
To Next Page
Loading...
