62
DRIVE OF AGRICULTURAL MACHINES
NM13N001 NM13N002 NM13N003
WORKING WITH PTO SHAFT
1. When working with PTO shaft, mind proper attachment of all covers.
2. After completing the work, always mount the PTO shaft cover back.
3. Connecting and disconnecting cardan shaft of aggregated machine to
rear PTO shaft of the tractor to be done only with the engine at halt, dis-
engaged PTO shaft clutch and dependent and independent revolutions of
PTO shaft lever in (N) – neutral position!
4. Connecting and disconnecting cardan shaft of aggregated machine to
front PTO shaft of tractor to be done always only with engine at standstill
and disengaged PTO shaft!
5. Any repairs or cleaning of parts of aggregated machines driven by PTO
shaft to be done only with engine at standstill, disengaged PTO shaft
clutch and dependent and independent PTO shaft revolutions lever in (N)
- neutral position.
6. After ending the works with rear PTO shaft it is necessary to shift de-
pendent and independent PTO shaft revolutions lever to (N)-neutral posi-
tion.
PTO SHAFT COVERS
The cover of PTO shaft (1) can be de-
mounted by unscrewing the cover in the
direction of arrows.
The cover of PTO shaft (2) must be
pushed in the direction of and arrow and
tilted over in the direction from tractor for
working with rear PTO shaft.
To Next Page
Loading...
