69
HYDRAULIC EQUIPMENT
NM13N009 NM13N101
HYDRAULIC CONTROL PANEL
Hydraulic control panel is placed in the
area of right fender.
External hydraulic circuit (A) enables
control of external hydraulic circuit
(quick-couplers).
Internal hydraulic circuit (B) enables rear
three-point linkage control.
MEANS OF INTERNAL HYDRAULIC CIRCUIT REGULATION
Hydraulic system enables three means of heave three-point linkage control.
Position regulation (fig.1) where some tools connected in three-point linkage are kept
automatically at constant height (position) to tractor.
Mixed regulation (fig. 2) which is the combination of position and power regulation. It
is suitable mostly for tillage on lots with different soil resistance.
Power regulation (fig. 3), with which tools connected in three-point linkage are auto-
matically vertically adjustable depending on the change in soil resistance.
All means of regulation enable also work with tools which has supporting wheel in the
so-called free (floating) position.
To Next Page
Loading...
