70
HYDRAULIC EQUIPMENT
NM12N010 NM13N011
INTERNAL HYDRAULIC CIRCUIT
CONTROL ELEMENTS
1. Lever for setting power or position
regulations
2. Lever for setting floating position,
height positioning of three-point link-
age with position regulation or mixed
regulation
3. Speed of three-point linkage lower-
ing control
4. Hydraulic sensitivity system control
FREE (FLOATING) POSITION
Free (floating) position enables work with
a tool which has supporting wheel. The
arms of rear three-point linkage are free
in this position.
Shift lever (2) to front position (a)
Position of lever (1) is not decisive
To Next Page
Loading...
