Manual disengagement of PTO shaft clutch leve
PTO shaft drive engagement lever
PTO shaft revolutions 540 and 1000 rpm shifting lever
By pulling manual clutch disengagement lever to upper
position, disengagement of PTO shaft clutch occurs. The
upper position of the lever is signalized by a lit control on
a dashboard. The lever is automatically locked with
a catch in the upper position. The lever can be unlocked
and return to the lower position by lifting the lever and
pressing the but-ton on the forefront of the lever.
If manual disengagement of the clutch lever is
ulled for a lon
er period of time, increased wear o
lamely of PTO shaft occurs.
Upper position - clutch disengaged
Lower position - clutch engaged
Rear PTO shaft is engaged with a lever (1) shaft drive
placed on the left side of driver's seat.
Gear shifting is done with engine at standstill and engaged
manual clutch lever.
a - dependent revolutions of PTO
with PTO shaft drive via
gearbox - revolutions are
dependent on the engaged
gear
n - Neutral position
b - independent revolutions of PTO
shaft drive - revolutions are
dependent on engine
revolutions
NM13N004
Shifting 540 or 1 000 revolutions of rear PTO shaft is done
with a lever (1) placed on the outer side of tractor on rear
PTO shaft.
Shifting is done with an engine at standstill and lever of
engaging PTO shaft drive in (n) position.
PTO shaft revolutions need to be selected
depending on the prescribed revolutions from
aggregated machines.
a - 1 000 rpm
b - 540 rpm
NM13N005
DRIVE OF AGRICULTURAL MACHINERY
To Next Page
Loading...
