ZETRON Model 16 - Page 15

SECTION 2 - SPECIFICATIONS
PROGRAMMING SPECIFICATIONS
Subscriber
Attributes
- Programmable individually or by range:
Capcode
Function digit
Validation
Format assignment
Numeric/Alpha assignment
Tone only restriction
Message required restriction
Priority page
Format Attributes
- Eight programmable format entries
Signaling format assignment
Maximum message length
Alternate data transmission rate
Communications
- Parity (does not apply to serial port)
- Baud rate 300, 1200, 2400, 4800, or 9600
- Timeout enable/disable
Paging Options
- Batch period (0 - 2550 seconds)
- Numeric message formatting en/disable (for Golay)
Station ID
- Enable/disable
- 15- or 30-minute interval
- 8-character call sign
Station Attributes
- Channel busy input polarity
- Terminal busy input polarity
- Hold request input polarity
- Digital data output polarity
- Digital mode output polarity
- Relay inhibit flag (for testing)
- Channel busy time (0 - 25.5 seconds)
- Request hold time (0 - 25.5 seconds)
- Request grant time (0 - 25.5 seconds)
- Key up delay time (0 - 25.5 seconds)
- Remote control enable/disable
- Remote control HLGT time (120 - 2220 ms)
Passwords
- Programmable four-character Security code
for paging access, may be disabled
- Programmable four-character Program Access code
for programming access
2-2