ZF AV 133 - Page 104

2. Use AA02.041.179 [Driver tool] and
5870.260.002 [Handle]
to insert the bushes
(thrust washers) into the portal housing.
Fig. 200
3. Slide the tapered roller bearing onto the
bear
ing bolt.
Fig. 201
4. Use 5870.058.061 [Driver tool] and
5870.260.002 [Handle]
to insert the bearing
inner rings into the intermediate gear.
Fig. 202
Assembly
104
EN 4472.751.001 - 2015-11