Index
BECS-129S Singular-head Computerized Embroidery Machine I
Index
Part I Features________________________________________________________________________1
Part II Control Panel and Basic Operations ________________________________________________6
2.1 Control Panel ___________________________________________________________________6
2.2 Main Screen ___________________________________________________________________10
2.3 Definition and Basic Operation of Keys_____________________________________________13
2.4 Indicator Light of Main Shaft Stop Position _________________________________________17
2.5 Start and Stop Button____________________________________________________________17
Part III Basic Knowledge and Operation__________________________________________________18
3.1 Work Status, Embroidery Mode and Work Sequence _________________________________18
3.2 Inputting Design from USB-Disk and Starting First Embroidery________________________21
3.3 Select Memory Design for Embroidery _____________________________________________26
Part IV Setting Parameters_____________________________________________________________29
4.1 Parameter Menu________________________________________________________________29
4.2 Real Time Rotation and Scaling up/down ___________________________________________30
4.3 Setting Repetition Embroidery ____________________________________________________34
4.4 Offset Point ____________________________________________________________________38
4.5 Cyclic Embroidery ______________________________________________________________39
4.6 Work Sequence_________________________________________________________________40
4.7 Standard Data Parameter ________________________________________________________42
4.8 Standard Trim Parameters _______________________________________________________45
4.9 Standard Machine Parameters ____________________________________________________47
To Next Page
Need help?
General