Zhermack DE 1 - Page 2

115 of 188
MAINTENANCE AND USE MANUAL
furnace DE
EN
GENERAL INDEX
CH. 1
INTRODUCTION
Pag. 117 1.1 How to read and use the manual
Pag. 118 1.2 Terminology and symbols
CH. 2
GENERAL INFORMATIONS
Pag. 119 2.1 Responsibility
Pag. 119 2.2 Warranty: general instruction
Pag. 119 2.3 Authorized personnel
Pag. 120 2.4 General safety regulations
CH. 3
DESCRIPTION OF THE EQUIPMENT
Pag. 122 3.1 General description of the equipment
Pag. 122 3.2 Table of the components
Pag. 122 3.2.1 Description of the components
Pag. 123 3.3 Control panel
Pag. 123 3.3.1 Description of control panel components
Pag. 124 3.4 Entering data
Pag. 124 3.5 Identification data
Pag. 125 3.5.1 On-equipment labels and symbols
CH. 4
TECHNICAL CHARACTERISTICS
Pag. 126 4.1 Technical characteristics and operating start
Pag. 126 4.1.1 Technical Data
Pag. 127 4.1.2 Standard accessories and accessories available on request
Pag. 127 4.2 Temperature tolerances
Pag. 127 4.3 The slew maximum
CH. 5
TRANSPORT AND MOUNTING
Pag. 128 5.1 Warning
Pag. 128 5.2 Packing and unpacking
Pag. 129 5.3 Transport and mounting
Pag. 130 5.4 Elimination / Dismantling
CH. 6
INSTALLATION AND FIRST-TIME USE
Pag. 131 6.1 Warnings and precautions
Pag. 131 6.2 Permitted ambient conditions
Pag. 131 6.3 Required work space
Pag. 132 6.3.1 Worktops
Pag. 133 6.4 Connecting up to the power supply
Pag. 133 6.5 Starting up the equipment
Pag. 134 6.6 Purpose of the equipment
Pag. 135 6.7 Improper and forbidden use