Zhiyun CRANE 2S User Manual

6
Installation and Balance Adjustment
Installing the battery
Unscrew the rear cover of the handle and install three original 18650 Li-ion batteries
(note the direction of the positive and negative poles of the batteries). Then, tighten
the rear cover of the handle.
①
②
Installing the tripod
Screw the tripod to the base of the CRANE 2S handle, then unfold the tripod and
place the CRANE 2S on a flat surface.
①
②
③
Installing the quick release base plate
Take out the quick release base and push the quick release base into the CRANE
2S tilt arm. The detachable design means that you can quickly dismount the camera
from the CRANE 2S. The rear of the quick release base contains three 1/4 screw
holes making it easy for you to mount the entire quick release base to other devices.
①
②

Zhiyun CRANE 2S Specifications

General

Battery Runtime	12 Hours
Charging Time	4 hours
Wireless	Bluetooth 5.0
APP Control	Yes
USB Charging	Yes
Battery Type	Li-ion
Pan Angle Range	360°
Following Deviation in Static State	±0.01°
Following Deviation in Motion State	±0.05° to ±0.1°
Ports	USB-C
Follow Mode	POV
Compatible Cameras	DSLR, Mirrorless, Cinema Cameras
Material	Aluminum
Operating Voltage	9.8V-12.6V