Handbook Ucontrol type-lines PXDM Date 06/04
TBL02_55-GB06/04 Part.-No. 00153239-GB
Page 9 / 105
¡ Line voltage 3~ 208 ... 400 V (-15 % / +10 %), 50/60 Hz
¡ Stepless controlled output voltage approx. 20-100 % (line voltage)
¡ Min. motor current 0.2 A for PXDM5, PXDM5 / 0.5 A for PXDM10/15/25/35...
¡ Input resistance for sensor or signal set for the rotational speed:
- For 0-10 V input: R
i
> 100 kW
- For 4-20 mA input: R
i
= 100 W
¡ Voltage supply e.g. for sensors +24 V ±20 %, I
max
120 mA
¡ Output (0-) 10 V, I
max
10 mA (short-circuit-proof)
¡ Max. permissible ambient temperature 40° C (up to 55° C with derating)
¡ Min. permissible ambient temperature 0° C (if mains voltage is not switched off up to -20°C)
¡ Permissible rel. humidity 85 % no condensation
¡ Interference emission EN 50081-1
¡ Interference immunity EN 61000-6-2
¡ Harmonics current EN 61000-3-2
The units comply with EN 61000-3-2 for a "professional unit". Up to a maximum current of
4 ampere the limits were complied without any qualification.
3.3 Versions Ucontrol
Housing version IP54 for wall mounting
¨ PXDM..A internal LCD-Multifunction display with plain language text
¨ PXDM.. external terminal type AXG-1A(E), for start-up and setting necessary
IP20 for switch cabinet mounting (semiconductor fuses must be installed in supply by client)
¨ PXDM..AE internal LCD-Multifunction display with plain language text
¨ PXDM..E external terminal type AXG-1A(E), for start-up and setting necessary
To Next Page
Loading...
