Handbook Ucontrol type-lines PXDM Date 06/04
TBL02_55-GB06/04 Part.-No. 00153239-GB
Page 20 / 105
7. Menu group Start, Info, Events
7.1 Start
7.1.1 PIN Input
The service menu for the installation can be protected against unintentional changes by a pin code
With further pin codes putting back to pre-setting is possible.
Example for PIN input 0010
for opening service menu (if PIN-protection activatet F Controller
Setup).
Inform before input the respective pin about effects (F explanation).
PIN Function description
0010 opening service menu, if PIN-protection activated (F PIN protection)
1234 opening “setting“, if “set protection“ ON (F set protection)
9090 restore user setting (F Save user setup)
9091 Save user setting (corresponds function Save user setup ON) (F Save user setup)
9095 Restore factory setting = delivery status (F respective mode)
7.1.2 Language
Menu language by the factory set to English. In this menu different national languages can be selected
(GB = English, D = Deutsch, ...).
Example for re-programming English to German
↓P ↑ ESC
↓P ↑ ESC
↓ ↑
3x
2x