Handbook Ucontrol type-lines PXDM Date 06/04
TBL02_55-GB06/04 Part.-No. 00153239-GB
Page 6 / 105
1.4 Transport and storage
¡ Ziehl-Abegg controllers are packed ex factory to suit the previously agreed transport method.
¡ Always use the original packaging materials when transporting the controller.
¡ When transporting by hand, ensure that personnel possess the strength required to lift and carry the device.
¡ Avoid shocks and impacts to the device.
¡ Check the packaging and controller for damage.
¡ Store the controller in its original packaging in a dry and weather-proof room.
¡ The device must not be exposed to extreme heat and low temperatures.
1.5 Obligations of owner
The owner is obliged to ensure that the devices are operated in perfect working order
only. It is the owner's responsibility to safeguard hazardous areas located between
ZIEHL-ABEGG devices and customer equipment!
2. Safety measures
2.1 Symbols and information
The symbols and information below warn of danger and indicate certain safety measures that must be taken.
Pay attention to this information and pass it on to other users!
Attention! Hazardous area!
Danger owing to electric current or voltage!
Important information!
To Next Page
Loading...
