Need help?Do you have a question about the ZIEHL-ABEGG ZETADYN 2 and is the answer not in the manual?
General| Brand | ZIEHL-ABEGG |
|---|---|
| Model | ZETADYN 2 |
| Category | Media Converter |
| Language | English |
Important safety warnings, information, and danger notices regarding electrical hazards.
The retrofit kit is an adapter set for easy replacement of ZETADYN 2 with ZAdyn4C.
Connects leads from ZETADYN 2 to ZAdyn4C, including STO function integration.
Diagrams illustrating the physical dimensions of the retrofit kit for installation planning.
Mapping of parameter functions between ZETADYN 2 and ZAdyn4C control system menus.
Configuration of special inputs for automatic evacuation types in ZETADYN 2 and ZAdyn4C.
Safety warnings and general precautions for performing mechanical installation work.
Steps to remove ZETADYN 2 and install the ZAdyn4C, including line disconnection.
Detailed instructions and diagrams for mounting the retrofit kit on ZAdyn4C models 011-032.
Detailed instructions and diagrams for mounting the retrofit kit on ZAdyn4C models 040-074.
General safety warnings and precautions for performing electrical installation work.
Details on connecting leads from the retrofit kit to the ZAdyn4C terminals.
Instructions for securing connecting leads and shielding for strain relief on the ZAdyn4C.
Details on connecting leads from the retrofit kit to its internal terminals.
Procedure for replacing the connector on the X-K connecting lead.
Instructions for securing connecting leads and shielding for strain relief on the retrofit kit.
Wiring for ZETADYN 2 (board post-March 2001) to ZAdyn4C connections.
Wiring for ZETADYN 2CF (board pre-March 2001) to ZAdyn4C connections.
Wiring diagram and procedure for rewiring the X-O connecting lead.
General information and checks for commissioning the ZAdyn4C.
Review of essential parameter settings for brake control and monitoring functions.
Detailed electrical, ambient, and physical specifications for the retrofit kit.
Part numbers for ordering the ZETADYN 2 to ZAdyn4C retrofit kits.
Circuit diagrams illustrating the retrofit kit's wiring and connections on the ZAdyn4C.
Declaration of compliance with relevant EU directives and harmonised standards.
To Next Page