To Next PageTo Next Page
Need help?Do you have a question about the ZIEHL TR640IP and is the answer not in the manual?
General| Communication | Modbus RTU |
|---|---|
| Protection class | IP20 |
| Housing Material | Plastic |
| Outputs | 4-20 mA, 0-10 V, Modbus RTU |
| Output | 4-20 mA, 0-10 V, Modbus RTU |
| Power Supply | 24 V DC |
| Weight | 200 g |
| Measurement Range | 0°C to 400°C |
Explains the device's display elements and status indicators.
Details the operation and functionality of the joystick control.
Describes the LED indicating the status of the Ethernet connection.
Covers alarm assignment, 2 of x, locked alarms, and relay behavior.
Explains ROCOT function for rapid temperature rise detection and alarm triggering.
Provides information on the Ethernet socket for network cable connection.
Covers rail mounting, wall mounting, and wiring connection recommendations.
Specifies safety requirements for circuit breaker installation and fuse rating.
Details how ambient temperature affects device performance and installation.
Guides on device operation, language, date, and time settings.
Instructions for connecting the device to a network and accessing it.
Explains compensation for line resistance in sensor measurements.
Describes how to select and load predefined application programs.
Details the various configurable parameters available for the device.
Describes the display page showing all sensor measurements and their status.
Details the mapping of sensors to specific alarm outputs (relays).
Explains the information presented on the device's info page.
Explains the '2 of x' function for triggering alarms based on multiple sensors.
Details alarm triggering based on the rate of temperature change (slope).
Describes alarm triggering based on calculated temperature slope over time.
Covers ROCOT backshift, cyclic relay tests, and device simulation modes.
Information on firmware updates, program updates, and Modbus communication.
Explains the alarm counter and temperature statistic functions.
Troubleshooting steps for relay switching issues and alarm counter date errors.
Diagnosing and resolving sensor measurement errors and display issues.
Resolving problems with device parameterization, code lock, and network access.
Technical specifications for relay outputs K2, K3, and K4.
Technical specifications for relay output K1.
Details specifications for external inputs like the reset input.
Specifies ranges, tolerances, current, and timing for sensor inputs.
Details test conditions, voltage ratings, and insulation requirements.
Information on Ethernet interface speed and real-time clock features.
Outlines the EMC emission and immunity test standards applied.
Covers operating temperatures, climate resistance, wiring, and vibration data.
Details housing dimensions, mounting methods, and protection class.
Presents detailed dimensional drawings of the Housing V6.
Identifies key housing components and describes fixing methods.
