ZiLOG System 8000 - Page 292

HRM Zilog
HRM
The following commands are recognized by SMDMON:
COMMAND: CEC / REC / ILC
DESCRIPTION:
CEC clears the lap summary command, error and lap
counters.
REC displays the lap summary counters in tabular form.
Refer to the description of the ;ap summary in the
INTRODUCTION TO SMD DIAGNOSTICS.
ILC increments the current lap counter by 1. This is
useful in command lines with large repetition counts.
EXAMPLE:
CEC 9999((RAND)(RALL)(WR)(RD)(CMP)(ILC))
REC
The first command clears all fields in the lap summary.
The second line repeats a random write-read-compare
test 9999 times, each time incrementing the lap counter
by 1. The REC command displays the lap summary.
COMMAND: COMPARE
CMP
DESCRIPTION:
s~eseg sreoff desseg desoff cmplnth
srcseg srcoff desseg desoff cmplnth
If NO parameters are entered:
Compares the current write buffer and read buffer
beginning at <wseg>woff and <rseg>roff. lnth
bytes are compared.
If ANY parameters are in the command string:
Compares the buffer at <srcseg>srcoff with the
buffer at <desseg>desoff for cmplnth bytes.
A m~ssage tells if and where the first mismatch is
found.
CMP is a special abbreviation of COMPARE.
EXAMPLE:
WR 3 0 1024
RD 2 0
CMP 2 0 -1 0 5 1 ~~
CMP
A-61
Zilog
A-61