EasyManua.ls Logo

Zline BENT FRAME FIX RA - Page 2

Zline BENT FRAME FIX RA
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Safety Instructions
NOTE: This repair is to be conducted only by a trained technician or service provider. This
repair is not approved for a consumer to complete.
Scan on your phone to watch a step-by-step video tutorial of these
technician instructions.
WARNING
IMPORTANT SAFETY INFORMATION: Before carrying out this repair, carefully
move the range out from its cutout for appropriate access. Use caution when
removing any anti-tip chains or devices installed with the range. It’s also
recommended to disconnect the range from electricity and shut of the gas supply
valve (if applicable) for added safety.
BEFORE AND AFTER
Refer to the images below; the left photo is an example of a bent doorframe on a ZLINE
range; note the gap between the gasket and door. The right photo is of a door that’s been
fixed through this repair, showing a tight seal with no gaps.
BEFORE REPAIR