CLEARANCES & DIMENSIONS
MICROWAVE DRAWER MEA SUREMENTS
Dimensions shown in Figure 1 must be used. Given dimensions provide minimum clearance. Locate
electrical outlet in the shaded area in the upper left-hand corner of the cutout (also see Figure 3) Contact
surface must be solid and level. The floor of the opening should be constructed of plywood strong
enough to support the weight of the oven.
Figures 1 & 2 contain Microwave Drawer
measurements for reference in planning the
drawerās location. This Microwave Drawer can be
installed below any electric or gas wall oven. It
can also be installed using an electrical outlet in
an adjacent cabinet within the area where the
p
provided electrical cord can reach. The power
cord access hole inside the cabinet should have
a minimum diameter of 1 ā and be free of
all sharp edges. ALWAYS allow for sufficient power
cord length to the electrical outlet in order
to prevent tension.
1
/
2
2
Figure 1
Figure 2
To Next Page
Loading...
