What to do if my Zline MWO-24 Microwave Oven does not work?
If your Zline Microwave Oven isn't working, there are a few things you can check: * **Circuit breaker:** Look in the fuse box to ensure the circuit breaker for the microwave is in working order. * **Plug:** Make sure the microwave is properly plugged into the outlet. * **Power:** Verify that there isn't a power cut by checking if the kitchen light works.
What to do if the appliance does not work appears in the display panel of my Zline Microwave Oven?
If 'the appliance does not work' appears on the display panel of your Zline Microwave Oven, the childproof lock is likely active. Deactivate the childproof lock (see section: Childproof lock).
Why a power level cannot be set on Zline Microwave Oven?
If a particular operating mode or power level cannot be set on your Zline Microwave Oven, it's because the temperature, power level, or combined setting is not possible for this operating mode. Choose permitted settings.
Why can't I set a specific power level on my Zline MWO-24 Microwave Oven?
If you cannot set a particular operating mode or power level on your Zline Microwave Oven, it means that the temperature, power level, or combined setting is not possible for this operating mode. Choose permitted settings.
Why does my Zline Microwave Oven take longer to heat up food?
Several factors can cause your Zline Microwave Oven to take longer to heat food: 1. **Power level:** The selected microwave power level may be too low. Try selecting a higher power level. 2. **Food quantity:** If you've placed a larger amount of food in the microwave than usual, it will take longer to heat. As a general rule, doubling the amount of food will almost double the cooking time. 3. **Food temperature:** If the food was colder than usual, it will take longer to heat. Stirring or turning the food during cooking can help.
What to do if '‹ : ‹ ‹' is on the display panel of my Zline MWO-24?
If you see '‹ : ‹ ‹' on the display panel of your Zline Microwave Oven, it indicates a power cut. You need to reset the clock.
Why can't I set a particular operating mode or power level on my Zline MWO-24 Microwave Oven?
If you're unable to set a specific operating mode or power level on your Zline Microwave Oven, it's likely because the temperature, power level, or combined setting isn't possible for the selected operating mode. Choose permitted settings.
What does mean on my Zline MWO-24 display panel?
If appears on the display panel of your Zline Microwave Oven, the thermal safety switch-off function has been activated. Call customer service for information on how to check the temperature sensor.
What does “ ‚ mean on my Zline MWO-24 Microwave Oven display panel?
If “ … appears on the display panel of your Zline Microwave Oven, it indicates a humidity sensor error. Call customer service for information on how to check the humidity sensor.
What does “ … mean on my Zline Microwave Oven display panel?
If “ … appears on the display panel of your Zline Microwave Oven, it indicates a humidity sensor error. Call customer service for information on how to check the humidity sensor.
General| Brand | ZLINE |
|---|---|
| Model | MWO-24 |
| Type | Microwave Oven |
| Capacity | 1.6 cu. ft. |
| Power | 1000 Watts |
| Color | Stainless Steel |
| Power Output | 1000 Watts |
| Cooking Levels | 10 |
| Voltage | 120V |
| Size | 24 inches |
To Next Page
