Zline MWO-30 - Electric Installation and Outlet Area

To Next Page

To Previous Page

Electrical Connection

ELECTRIC INSTALLATION

• This product must be connected to a supply circuit of the proper voltage and

frequency. Wire size must conform to the requirements of the National Electric

Code or the prevailing local code for this rating.

• The power supply cord and plug should be brought to a separate 20-amp

branch circuit single grounded outlet. The outlet box should be located inside the

cabinet above the appliance.

• The outlet box and supply circuit should be installed by a qualiﬁed electrician

and conform to the National Electrical Code or the prevailing local code.

• The voltage used must be the same as speciﬁed on this microwave oven. Using

a higher voltage is dangerous and may result in a ﬁre or oven damage. Using a

lower voltage will cause slow cooking.

• The manufacturer is not responsible for any damages resulting from the use of the

oven with any voltage other than speciﬁed.

OUTLET AREA

• Anywhere within the shaded area the minimal distance between the appliance

and the wall is 1 3/4”.

• The outlet can be located anywhere within the shaded area.

BEFORE INSTALLATION

MWO-24

MWO-30

Other manuals for Zline MWO-30