Need help?Do you have a question about the ZLINK ZL-100 and is the answer not in the manual?
Details the ZL-100's capabilities as a small, high-performance home automation hub.
Explains the Z-Wave technology and its advantages for home automation.
Guides users on controlling their smart home via the ZLINK web interface.
Details the ZLINK account as the access point for web and mobile applications.
Specifies the valid format and allowed characters for email addresses and passwords.
Step-by-step guide on how to reset a forgotten ZLINK account password.
Details the process of entering and confirming a new password after a reset.
Instructions on powering the ZL-100 and connecting to its Wi-Fi access point.
Provides the default password for connecting to the ZL-100's Wi-Fi access point.
Informs users how to cancel the setup process and that settings will be deleted.
Instructs users to reset the ZL-100 if server connection fails repeatedly.
Details how to customize ZL-100 properties like name, image, and location.
Explains how to manage virtual rooms for organizing smart devices.
Provides steps for adding new custom rooms or deleting existing ones.
Explains how the ZLINK app discovers Z-Wave devices during addition.
Instructions on entering the DSK key for devices supporting Security 2 authentication.
How to change a device's name and assign it to a specific room.
How to stop the device exclusion process if needed.
How to find out which room a specific Z-Wave device is assigned to.
Explains how to control device settings like brightness or on/off states.
Steps to remove or replace a device that is reported as unreachable or has failed.
Detailed steps to reset the ZL-100 to its original factory default settings.
Instructions for manually updating the ZL-100 firmware.
Steps to remove the ZL-100 hub from the ZLINK application.
How to remove a ZL-100 that is not currently connected to the network.
Explains the roles of nodes, controllers, and the structure of home control groups.
Details the format of Z-Wave command frames and the definition of association groups.
Explains the Network Information Frame and how to send it for device information.
Explains how command classes are represented in the ZLINK app GUI.
Provides information on how to get support and access the Knowledge Base.
Steps for creating a ZLINK account and adding the ZL-100 to your Wi-Fi.
Instructions on how to perform a manual reset on the ZL-100 using the pinhole.
Explains the importance of the DSK key for Z-Wave device security and setup.
To Next Page
General