CONNECTING CABLES
4
To connect cables
1. Connect the BNC cable to the video connector attached on your camera, and connect the RCA
cable to the audio connector attached on your camera.
2. Connect the BNC cable to the video input on a monitor, DVR or Video Balun.
3. Connect the RCA cable to the audio input on a monitor or DVR.
4. Connect the power adapter to the RCA Power connector attached on your camera. When the
monitor is turned on, the camera image and sound appears.
It is very important that you identify these ends before installing the cable so that you have the correct
ends at the correct location.
Note
Monitor
RCA Cable
DVR
Video Balun
Monitor
DVR
BNC Cable
RCA Cable
Building NO.5, Shaer Bluesky Science and Technology Park,
Shajing,Baoan District,Shenzhen
Fax: Tel: 0755-3392-6029 0755-3392-5683
To Next Page
Loading...