10
If you were unable to connect your camera successfully:
5
Status Light Definitions
The camera is powering on.
Solid green
Solid blue
The camera has successfully connected to the WiFi
network.
Blinking green
The camera is ready for setup.
Blinking blue
The camera is connecting to the WiFi network. Please
do NOT turn off or unplug the camera at this time.
Please make sure that you entered the network name
and password correctly. Note: Both are case-sensitive.
Make sure that you are connecting to a 2.4GHz
WPA/WPA2 WiFi network, and that your network is not
hidden.
You may need to improve your WiFi strength. Visit
www.zmodo.com/support for suggestions.
To Next Page
Loading...