Zodiac Aerospace Aerazur 210225-0 User Manual

61 rue Pierre Curie – CS 20001 – 78373 Plaisir Cedex – France
Tel: + 33 1 61 34 23 23 – Fax: + 33 1 61 34 24 23
http://www.zodiacaerospace.com
CAGE Code: F6101
This document is AERAZUR’s property. It can neither be copied nor divulged without AERAZUR’s consent.
25-65-09 REV 13
T - 1
LIFE JACKET
210225-0 C10 E
210224-0 C10 E
210225-1 C10 F
210225-2 C10 F
210228-0 C10 E
COMPONENT MAINTENANCE MANUAL
WITH
ILLUSTRATED PARTS LIST
The document reference is online, please check the correspondence between the online documentation and the printed version.

Zodiac Aerospace Aerazur 210225-0 Specifications

General

Brand	Zodiac Aerospace
Model	Aerazur 210225-0
Category	Personal Care Products
Language	English

Summary

Record of Revisions

Description and Operation

General Description

Overview of the life jacket's purpose, design, and versions.

Inflatable Buoyancy Chamber

Technical Features

Operational Use

Step-by-step instructions for using the life jacket in emergency situations.

Testing and Fault Isolation

General Testing Conditions

Overpressure Test Procedure

Detailed steps for conducting the overpressure test on the buoyancy chamber.

Leakage Test Procedure

Methodology for performing the leakage test and locating leaks.

Fault Isolation Guide

Identifies probable faults, their causes, and recommended remedies.

Disassembly Procedures

Disassembly Procedure for Appl.A

Disassembly Procedure for Appl.B, C, D

Cleaning Procedures

Inspection and Check Procedures

General Inspection Requirements

Inspection of Buoyancy Chambers and Components

Detailed inspection points for buoyancy chambers and all components.

Specific Component Checks

Checking fabric, seams, markings, belt buckle, inflator, CO2 cylinder, light system, etc.

Repair Procedures

General Repair Policy

Buoyancy Chamber Repair

Detailed procedure for repairing punctures and tears on the buoyancy chamber.

Replacement of Removable Components

Repairing the Buoyancy Chamber: Bonding

Step-by-step guide for bonding procedures to repair the buoyancy chamber.

Replacing Specific Components

Assembly and Storage

Preparation and Component Fitting

Special Tools, Fixtures, and Equipment

Detailed Parts List