- 32 -
Questions & Answers
Abnormal Condition
QUESTIONS AND ANSWERS
ABNORMAL CONDITION
"HOT" appears.
Condition CauseStatus
The Baking Pan's inside temperature is over 104ºF. This
indication will appear if you attempt to use the unit
continuously.
Open the Lid and allow the Baking Pan interior to cool.
Keys do not operate.
The Power Plug is disconnected from the outlet.
Plug the unit into the outlet securely.
The motor protective device is activated due to an
excessive load on the motor.
The unit will automatically resume operation after 30
minutes. Discard the unfinished bread and start the
process again from the beginning using ingredients that
put less load on the motor.
The operation lamp
turns on but the unit
does not operate
While "PREHEAT" is indicated, the temperature of
ingredients is adjusted, so kneading does not start.
This does not indicate any malfunction.
Beeps keep sounding.
If in the KEEP WARM cycle, remove the baked
bread immediately and press the START/RESET key.
The motor does not
operate during the
KNEAD process.
(kneading does not start).
Power supply has been discontinued for more than 30
miutes due to power failure, disconnection of Power Plug,
a defective fuse or circuit breaker.
Discard the unfinished bread and start the process
again from the beginning using new ingredients.
The Baking Pan is not installed securely.
Install securely.
"3:30" flashes and the
operation lamp turn off
during baking/cooking.
Smoke comes out
from the Steam
Vent and a burning
smell is generated.
The Home Bakery
rattles during operation.
The sound heard is the motor during the kneading
process.
This does not indicate any malfunction.
The Home Bakery
makes noise during use.
Ingredients or baked product collect on the Heating
Element or inside the unit.
This does not indicate any malfunction. Make sure to
clean the unit after use. Unplug the unit and allow it to cool
before cleaning.
Condition CauseStatus
To Next Page
Loading...
Need help?
General
