ZOLL E Series Service Manual

E Series Service Manual
9650-1450-01 Rev. D 5-1
Chapter 5
Disassembly Procedures
This chapter provides instructions on how to disassemble and reassemble the E Series unit, and includes the following sections:
“Front Panel Removal” on page 3
“Front Panel Disassembly” on page 5
“Bottom Panel Removal” on page 10
“NIBP Pump Removal” on page 11
“System Board Removal” on page 13
“System Interconnect Board Removal” on page 16
“S
P
O2 Board Removal (MS-11)” on page 17
“S
P
O2 Board Removal (MX-1)” on page 17
“Isolated Power Supply Removal” on page 18
“Bridge Board Removal” on page 20
“High Voltage Assembly Removal” on page 23
“Battery Interconnect Board Removal” on page 24
“A/C Charger Assembly Removal” on page 26
“Access Detect Cable Removal” on page 27
“Capacitor Removal” on page 28
“Connector Panel Removal” on page 29
“Communication Board & PCMCIA Module Removal” on page 31
“Recorder Removal” on page 32

ZOLL E Series Specifications

General

Display Type	Color LCD
ECG Monitoring	Yes
Pacing	Yes
Pacing Rate	30-180 ppm
SpO2	Optional
NIBP	Optional
EtCO2	Optional
Printer	Integrated
Data Management	Yes
CPR Feedback	Yes
IP Rating	IP55
Pacing Output	0 - 140 mA
Battery Type	Rechargeable lithium ion
Battery Life	4 hours
Energy Selection	1-360 Joules
Display Size	6.5 inches