Name: ZOLL E Series
Brand: ZOLL
Rating: 4 (1 reviews)

To Next Page

To Previous Page

E Series Service Manual

5-2 9650-1450-01 Rev. D

Required Equipment

• #1 Philips head screwdriver

• #2 Philips head screwdriver

• #24 Hex head screwdriver

• Wooden stick

• Needlenose pliers

• Wire Cutters

• Exactor Knife

• 1/2” Nut Driver

Safety Precautions

Warning! SHOCK HAZARD!

Caution TAKE THE NECESSARY PRECAUTIONS TO GUARD AGAINST SHOCK OR INJURY BEFORE YOU CONDUCT

DEFIBRILLATOR TESTS OR REPAIRS.

• Only properly trained technicians should service the unit.

• The unit can contain deadly voltages even if the unit is turned off.

• Make sure to discharge the unit before working with it.

• Make sure you take the necessary precautions when working with static sensitive units. For example, you must wear a conductive wrist strap (which

touches your skin) connected to a grounding mat and to the earth ground. You must remove the wrist strap when you discharge high voltage or when

you are working on energized equipment.

• Wear gloves to prevent skin oils from affecting the equipment.

ZOLL E Series Specifications

General

ZOLL E Series Service Manual

Questions and Answers: