ENGLISH
13.
Bluetooth connection
1. Turn the mode switch to BT mode, the M
indicator flashes three times and then goes
out.
2. Select one Bluetooth channel:
Press both Fn and Q, W or E keys to switch
between different Bluetooth channels (BT1,
BT2, BT3). The related indicator light will flash
quickly and then enter Bluetooth pairing mode.
Note: The keyboard can pair up to three
computers at the same time by these three BT
channels.
3. Turn on Bluetooth in your computer or other
device, search and select “keyboard4” and
start Bluetooth pairing.
4. When pairing is successful, the related
indicator light will stop flashing.
5. The keyboard will automatically pair to the
previously paired unit when turned on again.
To Next Page
Loading...