4
g. Select Print Server. (If there are two print servers in your LAN, please confirm it’s Node ID and
select port)
h. Done.
[Setup procedure in Windows 2000/XP]
Step1: Please check the packing list:
Please see step1of setup procedure for Windows 95/98/Me.
Step2: Setup procedure that Print Server connect to Printer:
Please see step2 of setup procedure for Windows 95/98/Me.
Step3: Install protocol in Windows 2000/XP:
a. Please make sure what protocol that you need, we could use IPX/SPX、TCP/IP、NetBEUI in
Windows 2000/XP.
b. If it needs to add new protocol, the procedure as below: Control Panel Æ Network and Dial-up
Connections Æ Local Area Connection Æ Properties Æ Install Æ Protocol Æ Add Æ In Internet
component, choose protocol what you need. Æ Done.
Step4: Install driver for Print Server in Windows 2000/XP:
a. Insert CD and execute setup.exe.
b. It will appear two utilities, one is Network Print Monitor, and the other is PSAdmin.
c. Done.
Step5: Add new Printer’s driver:
If it was a new printer type, please select [add printer] and complete this procedure.
Setup procedure as below:
a. Select Local Printer.
To Next Page
Loading...
Need help?
General
