Bluetooth USB Adapter User’s Manual
51
7 Security
7.1 AUTHENTICATION
Authentication is used to verify identity; it requires a passkey or link key from the remote
device. When a remote device attempts access, a visual and/or audio warning notifies the
local operator.
If the notification is ignored, access is denied after a preset timeout.
When devices are “paired,” those devices automatically exchange a link key and
Authentication is carried out without operator intervention.
7.2 AUTHORIZATION
Authorization is Yes-or-No security that requires operator intervention to avoid having the
connection time out and fail.
Authorization is limited to:
•
Yes
, you may connect (click the balloon to proceed)
• No
, you may not connect (ignore the balloon prompt and the connection will fail).
7.3 BLUETOOTH DEVICE IDENTITY
Every Bluetooth device has a unique Bluetooth Device Address (BDA) assigned to it
during the manufacturing process. This address cannot be changed by the end-user.
The BDA is usually displayed in hexadecimal format; 00:D0:B7:03:2E:9F is a valid BDA.
Each Bluetooth device also has a configurable, user-friendly name to help distinguish it
from other devices. The user-friendly name may be up to 99 alphanumeric characters in
length and may contain spaces.
My Personal Computer
is a valid user-friendly name.
7.4 ENCRYPTION
Encrypting data translates it into an unreadable format using a secret key or password.
Decrypting the data requires the same key or password that was used to encrypt it.
7.5 LINK KEY
A unique, internally generated, access code based on a passkey, the Bluetooth Device
Address and an internally generated random number. Link keys are generated
automatically when devices Pair.
After a link key is generated, manual entry of the passkey is not required.
To Next Page
Loading...
Need help?
General
