EasyManua.ls Logo

Zonet ZUB8300 - Advanced Functions and Specifications; Call Management Features; Audio and Visual Indicators; Device Specifications and Storage

Zonet ZUB8300
5 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ending a call from ZUB8300
To end a call, simply press the HANG UP button. Also when the other end hangs up the phone,
the call also is terminated automatically.
Call Transfer
During the conversation, you may transfer the call from car kit to cell phone or from cell phone to
car kit by pressing and hold TALK button about 5 sec.
NOTE: This function only works with Bluetooth phones that support HANDSFREE profile.
Last Number Redial
While ZUB8300 is in standby condition (not in conversation), press and hold the TALK button for
5 seconds and your phone will redial the last number that you have previously called.
NOTE: This function only works on Bluetooth phones that support HANDSFREE profile.
Speaker volume control
The ZUB8300 offers adjustment of speaker volume by pressing the “Vol. Up” or “Vol. Down”
buttons. You can adjust the volume to 8 pre-set levels. Each button pressed
increases/decreases one volume level; you can repeat the button press until a satisfactory level
is reached. An audio tone will be played when either the minimum or maximum volume has
been reached.
Audio and visual indication:
LED indication:
Car kit state Light state
Power on Buttons light on
No link with cell phone Blue light is off
Standby Flashes once every second.
During a call Flashes 2 times every second.
Incoming call Flashes 5 times and off 2 seconds
Pairing Rapid flashes 5 times every second
Audio indication:
Car kit state Audio indication
Power on “do do” sound
Pairing “do lu do lu do” melody
5
ZUB8300 specifications
Compatible: Bluetooth 1.1 HEADSET profile and HANDSFREE profile
Pairing distance: It is recommended that ZUB8300 and phone distance is as close
as possible with no solid objects in between.
Working distance: Up to 3 meters (best fit in the car)
Frequency band: 2.4GHz ISM band
Speaker power: 1W
Power: 12V cigarette lighter jack
Power consumption: 500mA during talk
Storage of car kit
1. Always store ZUB8300 safely. It is not suitable for children.
2. Avoid storage in direct constant sun light.
3. Do not expose ZUB8300 or any of its supplied parts to rain or other liquids.
4. If you wish to clean ZUB8300, please use dry and soft cloth.
Trouble shooting
1. Could not pair with phone
- Please check car kit is correctly plugged into cigarette lighter jack and the engine starts. If
you hear “do do”, it means ZUB8300 is powered on.
- Please check whether there are many paired devices in your cell phone. Some Bluetooth
cell phones cannot pair the ZUB8300 if the paired devices are over the limited quantity.
Please delete those you don’t use.
- If somebody nearby is in pairing mode with another ZUB8300 car kit, it is possible that their
cell phone connects to your car kit first. You can repeat pairing procedures to make
ZUB8300 work with your cell phone.
- Some times the cell phone will shut down. Please turn off the cell phone and repeat pairing
procedures.
2. Why does ZUB8300 not function?
- Make sure ZUB8300 is fixed firmly in the cigarette lighter jack properly.
- Make sure the 12V cigarette lighter jack is working properly.
- Make sure the cell phone is on and Bluetooth function is open.
- Please make sure ZUB8300 and cell phone are paired and linked. You can check the link
symbol in your cell phone.
3. Cannot hear the sound from car kit:
- Please make sure ZUB8300 and cell phone are linked. You can check the link symbol in
your cell phone.
- Make sure ZUB8300 is powered on and the blue light is flashing.
- Make sure the communication distance between car kit and cell phone is within 3 meters.
- Using a Bluetooth headset and a Bluetooth car kit paired at the same time; the ZUB8300
cannot link with your cell phone if the Bluetooth headset is still actively connected with your
cell phone.
6