5
Functions of parts
■
Top
■
Bottom
①
POWER indicator
This lights when the power is on. This
blinks when the remaining battery
charge is low.
②
Input type switch
Set this according to the equipment
connected to INPUT 1.
③
Stereo Link switch
Turn this on when inputting a stereo
signal through INPUTS 3–4. INPUT 3
will become the left signal while INPUT
4 will become the right signal. When the
Stereo Link switch is on, the input gain
for both Inputs 3 and 4 is controlled by
Gain knob 3.
④
Gain knobs
Use these to adjust input signal levels.
⑤
Level indicators
These indicators show signal levels after
gain knob adjustments.
The indicator colors change according to
the signal levels.
Lit green: Input signal present.
Lit red: Input signal is clipping.
⑥
MUSIC/STREAMING switch
This switches between MUSIC and
STREAMING modes. Set it to MUSIC
when using the AMS-44 to make music
with a DAW, for example. Set it to
STREAMING when using it to stream on
the web, for example.
⑦
OUTPUT A knob
Use this to adjust the volumes of the
signals output from the OUTPUT A
standard phone jacks and the Head-
phones A jack.
⑧
OUTPUT B knob
Use this to adjust the volume of the sig-
nals output from the Headphones B jack.
⑨
Battery cover
Slide this to remove it when loading
batteries.
To Next Page
Loading...
