Zoom F8n Pro - Troubleshooting

Z2I-4471-01
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
zoomcorp.com
Product names, registered trademarks and company names in this document are the property of their respective companies.
Windows
®
is a trademark or registered trademark of Microsoft
®
Corporation.
All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe
on the copyrights of their respective owners.
Troubleshooting
There is no sound or output is very quiet
→
Check the headphone connection.
→
Conrm that the headphone volume of the F8n
Pro is not lowered.
Sound from a mic or connected equipment
cannot be heard or is very quiet
→
Check the orientation of the mic or the volume
settings of the connected equipment.
→
Check the F8n Pro input level (trim) settings.
→
Check the F8n Pro fader settings.
→
Check the F8n Pro headphone volume.
→
Check the F8n Pro phantom power settings.
Recording is not possible
→
Conrm that the status indicator is lit red.
→
Conrm that the SD card has open space.
→
Conrm that an SD card is loaded properly in a
card slot.
→
If “Card Protected!” appears on the display, the
SD card write-protection is enabled. Slide the lock
switch on the SD card to disable write-protection.
Not recognized by computer when
connected
→
Conrm that the USB cable being used is not
designed only to provide power.
→
The operation mode must be set on the F8n Pro
to allow the computer to recognize it.
→
A driver is necessary for use as an audio interface
with Windows. Download the driver from the
ZOOM website (zoomcorp.com).