7
Enabling phantom power
Do not use this function with devices that
are not compatible with phantom power.
Doing so could damage the device.
Select “Input 1” after connecting
a condenser mic to it.
The Home Screen can be reopened
by pressing and holding
.
Adjusting input levels (trim)
• Input volume (trim) settings do not affect the
recording data.
• When recording in 32-bit oat WAV format, if
monitored audio sounds distorted, lowering
the volume of the recording le can restore the
waveform to a state without clipping.
• When recording in 16/24-bit WAV format, adjust
so that the level meters are around –12 dB at
maximum volume.
To Next Page
Loading...
