- 62 -
2. G9.2tt Z PEDAL SW
In case that it is difficult to put the SW when Z PEDAL is feet or the case easily Z PEDAL SW
is put on when Z PEDAL is controlled, the adjustment below is needed.
Case1. Difficult to put the Z PEDAL SW
1. Set Z PEDAL to MIN(raised).
2. Add a spacer on the one indicated in the figure above.
3. Control Z PEDAL and measure the weight needed to put the Z PEDAL SW.
4. Repeat the procedure from 1 to 3 so that the SW is put when Z PEDAL is feet strongly
and adjust the quantity of spacer.
Case2. Easily SW is put on when Z PEDAL is controlled
1. Set Z PEDAL to MIN (raised).
2. Remove only one spacer.
3. Control Z PEDAL and make sure whether Z PEDAL SW is put or not.
4. Repeat the procedure from 1 to 3 so that the SW is put when Z PEDAL is feet strongly
and adjust the quantity of spacer.
To Next Page
Loading...
