Zoom H4n Pro - Page 21

File name
21
Pausing
RECORDING AGAIN
Press
Press
Ref.
☞
OPERATION MANUAL
REC FORMAT
P.049
Mark setting
P.096
AUTO REC
P.063
REC LEVEL AUTO
P.069
FILE NAME
P.050
METRONOME
P.079
PRE REC
P.065
Mode change
P.036
HINT:
File naming
In 4CH mode the input from the
built-in and the external inputs
are saved separately as stereo
WAV  les.
Those 2  les are always
managed as a pair and named
as follows according to the
input.
MIC  le: 4CHxxxM.wav
INPUT 1/2  le: 4CHxxxI.wav
On screen, the 2  les are shown
together as M/I.
* You cannot change the file names.
Recording format
Change before recording.
Marks
When the recording format is
WAV, you can mark a  le by
pressing the REC button while
recording. You can move swiftly
to marked positions during play-
back. When you pause recording
of a WAV  le, a mark will be
added at the paused point.
NOTE:
During recording and playback, the recording format and  le
name type cannot be changed.
Blinks
Blinks
Lit
Counter does not return to 0.
Continue recording from the
paused position in the same file.
See the Operation Manual for details about MTR mode.