Setting the frame rate for internal timecode
When using timecode, frame rates must be set to be the same for devices being used and video and audio
data.
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use and to select “Timecode” and press to confirm.
3. Use and to select “FPS” and press to confirm.
4. Use and to select a frame rate and press to confirm.
Setting Explanation
23.976ND This is the most common frame rate used with HD cameras and
other high-definition video recording. The count is slower than the
actual time by 0.1%.
24ND This is the standard frame rate used for film recording. This is also
used with HD cameras.
25ND This is the frame rate for PAL video. This is used for PAL video, which
is used in Europe and other regions.
108
To Next Page
Loading...
