• R: Built-in XY mic right signal
• 1: INPUT 1
• 2: INPUT 2
Various settings can be made for the selected input. (→Making input settings)
Use and to select inputs. (→Selecting inputs for making settings)
❻
Built-in XY mic recording format (when built-in XY mic selected)
This shows the recording format for the built-in XY mic. (→Changing the recording file format for the
built-in XY mic)
Input source setting value (when INPUT 1 or INPUT 2 selected)
This shows the input source (INPUT 1 or INPUT 2). (→Setting INPUT 1/2 sources and phantom power)
❼
Volume amplification on the display
This shows the amplification of the volume shown on the display for the selected input.
Adjust this as necessary so that the volume shown is easy to check. (→Adjusting the volume display
size to make checking easier)
❽
LO CUT setting
This shows the LO CUT setting for the selected input. (→Reducing noise (low-frequency cut))
HINT:
• When a screen other than the Home Screen is open, pressing will open the Home Screen. This
function is useful for returning quickly to the Home Screen from various setting screens. (Returning
directly to the Home Screen is not possible from a few screens.)
• When the Playback Screen or FILE LIST Screen is open, can be pressed to open the Home Screen.
15
To Next Page
Loading...
