Making preparations
Inserting microSD cards
1. When the power is off, open the microSD card slot cover, and insert a microSD card all the way into
the slot with the pins facing up.
To remove a microSD card, push it further into the slot and then pull it out.
2. Close the microSD card cover.
NOTE:
• Always make certain that the power is off when inserting or removing a microSD card. Inserting or
removing a card while the power is on could result in data loss.
• When inserting a microSD card, be sure to insert the correct end with the correct facing.
• Recording and playback are not possible when a microSD card is not loaded in the M4.
• Always format microSD cards in order to maximize their performance after purchasing them new or
using them with a different device. (→ Formatting microSD cards)
22
To Next Page
Loading...
