Zoom M4 MicTrak - Setting the Date and Time

Setting the date and time (first time starting up)
The first time you turn the power on after purchase, after setting the date format, the date and time
settings screen will be shown on the display, so set them. The date and time are written to recording files.
1. Use and to select the item to set, and press to confirm.
2. Use and to change the value, and press to confirm.
3. Repeat steps 1–2 to set the date and time.
4. After setting all items, use and to select , and press to confirm.
After confirming the date and time, a screen to set the battery type will open, so set it. (→Setting the
type of batteries used (first time starting up))
NOTE:
If power is not supplied for a long time, the date and time settings stored in the mic will be reset. If the Set
Date/Time Screen appears during startup, set them again.
HINT:
The date and time setting can also be changed later from the Menu Screen. (→Setting the date and time)
35