Setting INPUT 1/2 sources and phantom power
INPUT 1/2 can be selected and enabled as inputs to use. Enabled inputs are armed for recording and their
signals are output from the PHONE OUT and LINE OUT jacks.
Moreover, when INPUT 1 and 2 are enabled, input source and phantom power on/off settings can be set
according to the connected equipment.
1. Select the input to set on the Home Screen. (→Selecting inputs for making settings)
2. Press repeatedly to select the setting.
The name of the selected setting is shown on the display.
Setting Explanation
OFF Use when not connecting any equipment. Inputs set to OFF will not
be recorded.
MIC Use when connecting a mic or other equipment with a low input
level.
MIC
Use when connecting equipment with mic level input that requires
phantom power.
LINE Use when connecting line level equipment.
The input level will be reduced 20 dB compared to when “MIC” or
“MIC ” is selected.
LINE
Use when connecting equipment with line level input that requires
phantom power.
41
To Next Page
Loading...
