Reducing noise (low-frequency cut)
Low frequencies can be cut to reduce the sound of wind and vocal pop noises, for example.
1. Select the input to set on the Home Screen. (→Selecting inputs for making settings)
2. Press repeatedly to set the cutoff frequency.
The selected frequency is shown on the Home Screen.
LO CUT can be set to OFF, 80Hz, 160Hz or 240Hz.
HINT:
We recommend using a windscreen (included) if air is blown directly at the mic , for example, when
recording outdoors or when the mic is near the mouth of a speaker.
43
To Next Page
Loading...
