Monitoring input and playback sounds
Input and playback sounds can be monitored using headphones, for example, and the monitoring volume
can be adjusted.
1. Connect headphones, for example, to the PHONE OUT jack.
2. Use to adjust the volume of the headphones or other connected device.
The volume will be shown on the display while it is being adjusted.
NOTE:
• The volume output from the PHONE OUT jack will be affected by changing the volume amplification on
the display. (→Adjusting the volume display size to make checking easier)
• When nothing is connected to the PHONE OUT jack, using will change the volume of the built-in
speaker.
• The built-in speaker cannot be used for monitoring while recording.
HINT:
• Adjust the headphone volume after adjusting the volume amplification on the display. (→Adjusting the
volume display size to make checking easier)
• Battery operation time can be lengthened by disconnecting headphones from the PHONE OUT jack when
headphone monitoring is not needed.
• The volume can be adjusted separately for the speaker and headphones.
49
To Next Page
Loading...
