Making recording settings
Setting the sample rate
The sampling rate used to record files can be set.
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use and to select “Rec Settings” and press to confirm.
3. Use and to select “Sample Rate” and press to confirm.
4. Use and to select the sample rate and press to confirm.
The following sample rates can be selected.
44.1kHz, 48kHz, 96kHz, 192kHz, 47.952kHz, 48.048kHz
NOTE:
The bit depth used for recording is always 32-bit float.
50
To Next Page
Loading...
