4. Use and to select “On” and press to confirm.
The pre-recording time when set to “On” depends on the sample rate setting (→Setting the sample
rate).
Sample Rate Pre-recording time
44.1 kHz 6 seconds
48 kHz 6 seconds
47.952 kHz 6 seconds
48.048 kHz 6 seconds
96 kHz 3 seconds
192 kHz 1 second
Enabling the recording start tone
Half-second tone signals (recording start tones) can be output from the output jacks (PHONE OUT and LINE
OUT) when recording starts.
Since recording start tones are also written to recording files, when recording audio for video with the M4,
sending its output signal to the camera input can make synchronizing audio and video easier.
1. Press when the Home Screen is open.
This opens the Menu Screen.
2. Use and to select “Rec Settings” and press to confirm.
52
To Next Page
Loading...
