Zoom M4 MicTrak - USB Mic Low-Frequency Cut

Reducing noise (low-frequency cut)
When using the M4 as a USB mic, low frequencies from the built-in XY mic can be cut, reducing the sound
of wind and pop noises, for example.
1. On the Home Screen (when connected using the USB mic function), select the built-in XY mic.
(→Selecting inputs for making settings)
2. Press repeatedly to set the cutoff frequency.
The selected frequency is shown on the Home Screen.
LO CUT can be set to OFF, 80Hz, 160Hz or 240Hz.
79