11
■
Left side
■
Right side
①
INPUT jacks
Connect mics and mixers to these.
These support XLR and 1/4-inch phone
(TRS/TS) plugs.
②
PHONE OUT jack
This can output sound to headphones.
③
VOLUME buttons
Use these to adjust the volume output from
the speaker and headphones.
④
REMOTE connector
Connected a dedicated remote control
here.
⑤
LINE OUT jack
This outputs sound to a connected device.
⑥
USB (Type-C) port
Connect this to a computer, smartphone or
tablet to use this mic as an SD card reader
or USB mic.
This supports operation on USB bus power.
Use a USB cable that supports data
transfer.
⑦
MIC/LINE IN jack
If an external mic is connected here, it can
be used to record instead of the XY mic.
This also supports mics that use plug-in
power.
⑧
MENU button
Press this to open the Menu Screen.
⑨
TIMECODE IN/OUT connector
This inputs and outputs timecode signals.
⑩
microSD card slot
Insert a microSD card here.
⑪
POWER/HOLD switch
Use this to turn the power on/off and to
disable button operation.
To Next Page
Loading...
