EasyManua.ls Logo

Zoom MicTrak M4 - Troubleshooting; Sound issues and recording problems; Recorded sound breaks up; Not recognized by computer when connected

Zoom MicTrak M4
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Z2I-4723-01
ZOOM CORPORATION
4-4-3 Kanda-surugadai, Chiyoda-ku, Tokyo 101-0062 Japan
zoomcorp.com
Troubleshooting
Sound is not output or the volume is very low
Check the headphone connection.
Conrm that the headphone volume of the M4 is not
lowered.
Check the orientation of the mic or the volume set-
tings of the connected equipment.
Check the M4 volume amplication on the display.
Check the M4 input source settings.
Plug-in power must be supplied if the mic connected
to the MIC/LINE IN jack supports plug-in power.
Monitored sound is distorted
Adjust the volume amplication on the display.
Built-in mic sound is distorted
Move the M4 away from the sound source. Use a
windscreen if air is blown at the mic.
Input 1/2 sound is distorted
Adjust the volume of the connected device, and con-
rm that the M4 input source setting is correct.
Recording is not possible
Conrm that the microSD card has open space.
Conrm that a microSD card is loaded properly in the
card slot.
Recorded sound breaks up
Use the M4 to format the microSD card.
Test the microSD card.
See the Operation Manual for details.
We recommend using microSD cards that have been
conrmed to operate with this recorder.
See the ZOOM website (zoomcorp.com) for informa-
tion about microSD cards that have been conrmed
to work with this unit.
Not recognized by computer when connected
Use a USB cable that supports data transfer.
Product names, registered trademarks and company names in this document are the property of their respective companies.
All trademarks and registered trademarks in this document are for identification purposes only and are not intended to infringe
on the copyrights of their respective owners.

Related product manuals