9
█
Using the FILE LIST Screen
On the Playback Screen, press to open the FILE LIST Screen.
This reopens the Playback
Screen.
Use these to select les.
This deletes the selected le.
Other functions
Sample Rate The sampling rate used to record les can be set.
Pre-recording Before recording is started, input signals can be captured for a certain amount of time.
Recording start tone
Tone signals can be output from the output jacks when recording is started.
Tone signals are also written in recording les.
Automatic playback
volume adjustment
The volumes of recorded sounds can be evened out without causing distortion during
playback.
Recorded le export
Recorded les can be normalized, converted for devices that do not support 32-bit Float
WAV format, and exported.
Line output level The line output level can be adjusted.
USB Mic
The M4 can be used as a USB mic. Even during use as a USB mic, the M4 mic sound can
also be recorded to a microSD card.
USB le transfer By connecting with a computer, data on the microSD card can be checked and copied.
Timecode
Timecode data can be written to recording les.
Timecode signal (LTC) input and output is also supported.
To Next Page
Loading...
